منابع تغذیه - مجتمع الکترونیک خوارزمی

ماژول تغذیه برد بورد و بردهای آردوینو
-1D

AC-DC Step Down Power Supply Buck Converter 12V 400mA 5V 100mA Isolated Power 220V to 12V/5V Dual Output
P11W89-1D

ورودی 380 ولت دی سی
خروجی 220 ولت سینوسی کامل
EG8010 درایور-IR2106
Y08-250R

مدار اینورتر با قدرت 2000 وات به همراه کنترل EGS002
V1-37D

فقط برد خام موجود است قطعات باید از بازار تهیه شود
W85-31.5R

FOR : EGS002 - EGS031

-Precision 5V-700mA (3.5W) Isolated Switching Power Supply
-ACDC Step-Down Module 220 to 5V
Functional characteristics and parameters
-The power supply is isolated industrial-grade module power supply, with temperature protection, over-current protection and short-circuit protection, high and low voltage isolation, AC85~265V wide voltage input, 431 precision regulated DC5V output, compact size
-Input voltage AC 85 ~ 265v 50/60HZ
-Output voltage DC5V ( ±0.2V )
-Output current 700mA
-Power 3.5W
-Appearance size
Volume: length, width, height, 3*2*1.8 (cm)
-Input and output identification map
-Reliability requirements
Environment 25 °C , average failure-free time greater than 16000 hours under 80% load
-4^3R

ماژول کنترل کننده مدارت سوئیچینگ با توان بالا با خروجی سینوسی کامل
P10-9D

EGS031 3 Phase Pure Sine Wave Module
P11W85-52.5R

Ultra-compact power module
P11W93-11.76R

CY7C68013A-56 chip: low-power version of the enhanced 51-core, 16KB program data areas, clocked at 48Mhz, 480Mbps high-speed trans protocol standards, in line with USB2.0 specification, backward compatible with USB1.1.
Firmware, EEPROM: complete the program in-system programming directly with a USB cable to download the firmware, on-board to provide 16K (24LC128) a large program memory (EEPROM), used as storage VID / PID and the USB firmware, the program space to meet the CY7C68013A need.
All GPIO After 2.54mm standard pin lead out, the great convenience learners expand their own design.
With corresponding firmware can be achieved through the core board logic analyzer function.
Provide the PDF principle diagram and related source
W01P05-3.75D

15MHZ Full CNC Signal Generator Double Channels DDS Function Arbitrary Waveform Pulse Signal Source Frequency Meter

Input voltage: 4.5-8V
Output voltage: continuous adjustable 4.3-27V (Counter clockwise to boost voltage)
Charging voltage: 4.2V
Charging current: up to 1A
Discharge current: the maximum 2A
Output reference maximum current: 5V 1.4A, 9V 0.8A, 12V 0.6A
Quiescent current: about 0.5 mA
Overshoot protection: Yes
Over discharge protection: None (also can be said yes, because 2V cut-off boost but does not block the output, output has 2V)
Deadline boost:: 2V, depending on whether added the additional protection board
Size: 3.3 x 2.3 x 0.9cm
Connecting example, VIN + connect 5V solar panel, BAT + terminal can output 4.2V to charging 3.7V 18650 battery, OUT + side can output an adjustable voltage
Can be used for multimeter, modified lithium battery charging
-3^9R

شارژ باطری
P10-1.46D

IC CHARGR BATTERY L-ION TSOT23-5
Charger IC Lithium-Ion TSOT-23-5
P10-0.05D

2A 1-Cell Li+ DC-DC Chargers
for USB and Adapter Power
P10-2.5

شارژر باطری لیتیوم
TP4056 1A 5V Lithium Battery 18650 Charging Board Module Plates MICRO USB Interface
P11W29-0.14D

Lithium Battery Charger Module 2A
Static input supply voltage (VlN): 20V
BAI: -8.4V-20V
BAT Short-Circuit Duration: Continuous
Operating environment Temperature range: -40 ℃ -85 ℃
Storage temperature range: -65 ℃ - 125 ℃
Double 8.4v / 4.2v lithium rechargeable single
Programmable charge current 0.1A-2A
Programmable steady precharge current 10% -100%
Wide operating voltage, maximum reach 18V
Red and green LED charge status indicator
Chip temperature protection, overcurrent protection, undervoltage protection
Battery temperature protection, reverse battery shutdown, short circuit protection
Switching frequency 400Khz, usable inductance 20uH and more
PWR_ON Power battery for switching control
Application:
Portable equipment, various chargers
Smartphone, FDA, mobile cellular telephone
MP4,MP5 players, tablets
HM
Power Tools
Walkie-talkie
-4r

XH-M604 Battery Battery Charge Control Module Digital Fully Powered Off Overcharge Protection Switch 6-60V
description
Input voltage: DC 6-60V
Display accuracy: 0.1V
Control accuracy: 0.1 V
Output Type: Direct output
voltage tolerance: ± 1 V
Apply to: 6-60V MAX 80V battery
Dimension: 81 * 54 * 18mm
Use: In the setting voltage value, start button play button raised, over stop button roll down key
1. Put the tension:
Normal display voltage state, press to turn on an output voltage button to start the charging voltage. long press the start button, digital flashing, by start and stop button, set the charging voltage value.
2. Set stop voltage:
normal voltage normal display mode, press to a stop voltage button, to the stop charging voltage. long press the stop button, digital flashing, by start and stop button, set the stop charging voltage value.
3. Setting error:
energized state holding the start / stop button, digital display 888, which is the factory default.
-34R

آی سی شارژر باطری لیتیوم MCP73831T-2ACI/OT
-0.13D

IMAX B6 80W Multifunction 1-6 Cells XT60 LiPo
Specifications:
Operating voltage range: DC 12-16V
Circuit power: Max. Charge power 80W / Max. Discharge power 10W
Charge Current Range: 0.1 ~ 6.0A
Discharge Current Range: 0.1 ~ 2.0A
LiLon / LiPo / LiFe: 1 ~ 6 cells
NiMH / NiCD: 1 ~ 15 cells
Size: 133 * 86 * 33mm
W-95R

IMAX B6 80W Multifunction 1-6 Cells XT60 LiPo
Specifications:
Operating voltage range: DC 12-16V
Circuit power: Max. Charge power 80W / Max. Discharge power 10W
Charge Current Range: 0.1 ~ 6.0A
Discharge Current Range: 0.1 ~ 2.0A
LiLon / LiPo / LiFe: 1 ~ 6 cells
NiMH / NiCD: 1 ~ 15 cells
Size: 133 * 86 * 33mm
W-130R

DC 12V-36V Charger Module Voltage OverDischarge Protection Precise Undervoltage Protection Module Battery Charger Module
Product name : Battery overdischarge protection module
Power supply voltage : The 12 V- 36 V battery
Output voltage : Equal to power supply voltage
Control precision : 0.1 V
Power consumption : Less than 1.5 W
Scope of application : Various storage batteries, lithium batteries
W41P11

Main Features:
● This is a mobile power module accessory, 18650 circuit board shell
● Main board with protection function: charging overcharge protection, over fall protection, over current protection
● The output voltage and current is stable, efficiently protecting user’s equipment
● Micro USB input: 5V 1A
● Double USB output: 5V 2.1A / 5V 1A
● Charging display: smart digital display
● Battery type: liquid lithium ion battery ( 18650 ) ( not included )
● Installation instructions: the circuit board is connected to the battery minus B -, B + is positive and does not connect the reverse side or the connection twists will be burned. The battery is connected in parallel to the welding then assemble the battery. Please note that the battery is insulated from the circuit board and the battery lead should not touch the circuit board so as to avoid causing a short circuit
P05W41-9R

3S 12.6V 40A lithium battery protection board
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Charging voltage: 12.6V - 13.6V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
P05-15^8R

Integrated 10 low load resistance MOS tube, continuous discharge 40A, 100mA balanced current, for electric drill/sprayer/ LED lights/low power inverter.
4S 16.8V 40A lithium battery protection board
Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
Charging voltage: 16.8V - 18.1V
Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
Continuous charge current (upper limit): 20A
P05-3.38

شارژر باطری لیتیوم آیون تک سل
Mobile Power Charging Po Motherboard 2A Output Booster Board Lithium Battery Charging Board diy LCD Kit
3.7V-5V
5V-1A
5V-2A
P05W41-8.8R

Input voltage: 9 ~ 12V
Maximum load current: 1.3A
Receive output voltage and current: 5V / 2A, 12V / 700mA
Launch coil size: diameter 43mm, thickness 2.3mm
Transmission module size: 18mm * 8.5mm * 15mm
Receiving module size: 10mm * 25mm * 3mm
Receiving coil size: diameter 43mm, thickness 1.2mm
Receive the best distance: 3 ~ 6mm
P18W17-44R

1.Battery type electricity quantity display
2.Wide application fields:lithium battery
3.Using Method:connect display board positive and negative port with tested battery positive and negative port,digital tube will display real-time battery electricity quantity
4.Digital Color:outline red,display block blue (when battery electricity quantity is full,it will be all on)
Display Electricity Quantity Parameter:
1.When battery voltage is over N*3.3V,it will illuminate 1 block electricity quantity (note:N represents battery quantity)
2.When battery voltage is over N*3.5V,it will illuminate 2 blocks electricity quantity
3.When battery voltage is over N*3.7V,it will illuminate 3 blocks electricity quantity
4.When battery voltage is over N*3.9V,it will illuminate 4 blocks electricity quantity
5.When battery voltage is less than N*3.3V,4 blocks display will be off;it represents battery is less than 3.3V,and you can charge the battery
P11-1.18D

ماژول پاور بانک
5V-2.1A
5V-1A

Input voltage - 5V via microUSB or solder pads on left-hand side of module
Full charge voltage - 4.2V
W29P11-0.17

ماژول تغذیه افزاینده ولتاژ
P11W41-1.81D

ماژول افزاینده ولتاژ همراه با نمایشگر سونسگمنت
DC-DC Boost converter Adjustable Step-Up High Power Supply Module Red LED Voltage meter/ Button Switch
W37-19R

مدار شارژر افزاینده
Mobile adjustable notebook car power supply DC-DC 10-32V turn 12-35V boost module 150W
150W DC-DC Boost Converter 10-32V to 12-35V 6A Step Up Voltage Charger Power
P10-7.2R

ماژول کاهنده DC to DC با جریان 3 آمپر
Step-down module DC-DC 3A adjustable mp1548 buck module super ultra-small size
P11W81-2.3R

ماژول کاهنده ولتاژ همراه با نمایشگر سونسگمنت
P11W29-3R

ماژول تغذیه کاهنده ولتاژ
W29P11-2^45R

منبع تغذیه DC to DC
دارای نمایشگر ولت و آمپر
P11W17-5

Module Properties: Non-isolated step-down module (BUCK)
Rectification: Synchronous rectification
Input voltage: DC 4.75V-23V
Output voltage: DC 1.0V-17V (Adjustable, Output < Input)
Output current: Rated current 1.8A (3A MAX, can not be prolonged)
Output ripple: 30mV (no-load)
Dimension: 17 x 11 x 4mm(L x W x H) / 0.67'' x 0.43'' x 0.16'' approx
Weight: 1g (per.)
P11-1.45R

200W Synchronous Buck Adjustable Module
Type: Non-isolated Buck Module (BUCK)
Input voltage: 8-55V (limit 60V, please leave the margin)
Output voltage: 1-36V continuously adjustable (factory default 12V or so)
Output current: Normal 10A Maximum (MAX) 15A
34R

DC-DC Step Down Adjustable Power Supply Module Buck Converter 5A
Module highlights: 5A high power, high efficiency and low ripple with power indicator
Module Properties: non-isolated buck module (BUCK)
Input voltage: 8-36V (input please try not to exceed 38V)
Output voltage: 1.25-32V continuously adjustable
Output Current: 0-5A
Output Power: 75W
5R

Solar panel MPPT Controller 5A-DC digital display step-down module constant voltage constant current charging
P05W17-46.5R

سلول خورشیدی 5.5 ولت 90 میلی آمپر
0.6W 5.5V 90mA Mini polycrystalline Solar Panel
P11-1.1D

رگولاتورCMOS با افت ولتاژ پایین و جریان 500mA
-2D

رگولاتور با افت ولتاژ بسیار پایین و جریان 5 آمپر
-0.37D

رگولاتور با افت ولتاژ بسیار پایین و جریان 5 آمپر
-0.7

رگولاتور شنت با دقت قابل تنظیم
-0.014D

AC/DC Converters 30W 85-265 VAC 45W 230 VAC
-0.27D

-0.0.3D

-0.03D

-0.03D

-0.03D

-0.03D

-0.03D

-0.03D

400mA Micropower
Synchronous Step-Up DC/DC
Converter with Output Disconnect
-2.54D

Converter Offline Flyback Topology 65kHz 16-SO
AC/DC Converters 700 Volt Monolithic
-1.2D

رگولاتور 3.3 ولت
-0.013D

رگولاتور LM2576 HVSX
-10R

Linear Voltage Regulator IC Positive Fixed Output 3.3V 150mA SOT-23-5
-0.12D

مبدل ایزوله DC to DC
P11-3.9R

مبدل ایزوله DC to DC
P11-8R

مبدل ایزوله DC to DC
P11-6.15R

مبدل ایزوله DC to DC
P11W93-8R

مبدل ایزوله DC to DC
OUTPUT 9V/550mA
Universal input range:85~264VAC, 100~370VDC
Regulated output, low ripple and noise
Over-current, short circuit and over- voltage protection
Plastic case, meets UL94V-0
P11-35R

2W Single O/P SIP Unregulated Isolated DC Converter 5V DC
W93

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
Manufacturer:AMASS:
Connector:plug:
Type of connector:DC supply:
Connector series:XT30:
Kind of connector:female:
Number of pins:2:
Mechanical mounting:for cable:
Electrical mounting:soldered:
Contact plating:gold flash:
Colour:yellow:
Current rating:30A:
Rated voltage:500V:
Flammability rating:UL94V-0:
Operating temperature:-20...120°C:
Spatial orientation :straight:
Contact material:brass:
Wire size:18AWG:
Body material:polyamide
-3.76R

-2R

-1R

-1.4R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
-3.76R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
Connector:plug
Type of connector:DC supply
Connector seri:XT60
Kind of connector male
Number of p:2
Mechanical mounting:for cable, holders
Electrical mounting:soldered
Contact plating:gold flash
Colour:yellow
Current rating:60A
Rated voltage:500V
Flammability rating :UL94V-0
Operating temperature:-20...120°C
Spatial orientation:straight
Contact material:brass
Wire size:12AWG
Body material:polyamide
Mechanical durability:1000cycles
Version:with locking, with holder
-3.76R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
Manufacturer:AMASS
Connector:plug
Type of connector:DC supply
Connector series:XT60
Kind of connector:female
Number of pins:2
Mechanical mounting:for cable
Electrical mounting:soldered
Contact plating:gold flash
Colour:yellow
Current rating:60A
Rated voltage:500V
Flammability rating:UL94V-0
Operating temperature:-20...120°C
Spatial orientation:straight
Contact material:brass
Wire size:12AWG
Body material:polyamide
-2.8R

High quality anti-skid protection T plug RC mode ESC battery connector with sheath
-5.4R